 |
to the air filters page |
G4
(EN779)
FP Pleated Panel
With
the increased demands of advancing technology the FP Pleated Disposable Filter
provides a high level of protection at a low replacement cost. This product
is suitable for use in general filtration applications or as the first
line of protection for a more elaborate filtration system. Being fully incinerable the product is particularly suited for application where this
form of disposal of the spent filter is anticipated..
The key attributes of the product are consistent efficiency, robust
construction and long life combined with low replacement cost.
G4
(EN779)
Construction
The FP/PL Disposable Filter contains a core of pleated non-hygroscopic and hydrophobic fibrous media designed specifically for use in air filtration.
The media is manufactured with a graded fibre density to ensure optimum and even dust retention combined with low initial resistance and is thermally bonded onto a galvanised steel support mesh for maximum physical stability. The aerodynamic pack is then fully bonded into a moisture resistant rigid white lined card frame and fitted with an airflow indicator.
The FP/PL Disposable panel is suitable for use as a pre-filter for
higher grades of air filtration or for use as a simple filter for general
use within air handling systems where the use of glass-fibre is
unacceptable.
| Filter nom Depth | Rated Velocity m/s | Efficiency Rating (EN 779) | Dust Holding Capacity g/m2 | Max Temp ºc | Max Humidity | Initial Resistance at RV (pa) | Rated Final Resistance (pa) |
| 25mm | 1.5 | G3 | 400 | 100 | 80%RH | 25 | 250 |
| 50mm | 2.5 | G4 | 625 | 100 | 80%RH | 37 | 250 |
| 100mm | 3.2 | G4 | 825 | 100 | 80%RH | 68 | 250 |
For a full range of holding frames & accessories please contact our Technical Sales Team
The FP Pleated Panel is available in a large range of standard sizes in 25mm (23mm Actual), 50mm (46mm Actual)
&
100mm (96mm Actual) and may also be produced in non-standard sizes and efficiencies to suit application requirements.