H10-U15 (EN1822)

FP/Laminar Minipleat

The FP/Laminar Mini-pleat system is the modern solution to the most stringent of filter requirements, capable of delivering air for either turbulent or laminar flow conditions according to efficiency. This product is used throughout many industries in applications where the performance of the filter is critical.

Typical performance characteristics for the FP/laminar Flow Hepa/ Ulpa are as follows:-

H10-U15 (EN1822)

Construction

Highly efficient humidity and fire resistant micro-glass paper is pleated into minipleat packs with thermoplastic cord separators forming linear air channels. The rigid packs are then bonded and polymer sealed into an extruded anodised aluminium channel frame and fitted with white epoxy painted micro-drawn protective grids to both faces. The completed assembly is then fitted with a continuous elastomer gasket to ensure a perfect seal every time. On completion of production each cell is tested to ensure optimum performance.
Packaging is in double wall protective cartons, internal face protection & a polythene bag.

This product is particularly suitable for clean benches, clean rooms, laminar flow ceilings etc. for use within education, micro-electronics, pharmaceutical and other industries requiring optimum levels of air filtration. 

Grade

Initial Resistance
(Pa)

The ‘FP/laminar Flow Hepa’ is available in a large range of standard sizes and may be requested in MDF as a special item if required.

Non-Standard sizes are also available on application.

For a full range of holding frames & accessories please contact our Technical Sales Team