to the air filters page
 

G2-G3 (EN779)

  

 

Fancoil Slimline Filters

FP Synthetic Fancoil Filters utilise a low resistance non-woven polyester filter media which may be vacuumed to remove dust particles. They are widely used in air conditioning units, fan coil systems, warm air furnaces, refrigeration, counters and electronic equipment cabinets, they are also often used to protect heat exchanger coils from dust, carpet fluff etc. Additionally, FP Fancoil filters  may also be used as a pre filter to protect higher grade filters further down stream.

Please note this product is also available with manufactured various other types of filter media, however we show below the technical performance of the most common variant - Synthetic Media

  

G2-G3
  (EN779)

  
   

Construction
Applications
 
The product is manufactured by sewing the synthetic media onto a pre-formed copper coated wire frame that has cross braces attached as necessary. The product is light, compact & simple to use. It may be lightly vacuum cleaned or washed if required, however due to it’s low replacement cost the FP/Fancoil Slimline Filter is generally considered to be disposable.		  


For the protection of coils in all variations of air-handling equipment, machinery etc.
   
       
 
Media Max Thickness Rated Velocity m/s Efficiency Rating    (EN 779) Average Arrestance Max Temp ºc Max Humidity Initial Resistance at RV (pa) Rated Final Resistance (pa)
5mm 1.5 G2 79% 100 80%RH 10 200
10mm 1.5 G3 85% 100 80%RH 3713 200

For a full range of holding frames & accessories please contact our Technical Sales Team
Available Sizes
   
Fancoil Slimline filters can be manufactured to almost any practical size and are available with pull tabs if required.